Lenovo ThinkVision T23i-30 23" Monitor User Manual

Page 15

Advertising
background image

Chapter 1 Getting started 1-7

7.

Connect one end of the USB cable to the USB downstream terminal of the monitor, and connect the

other end of the USB cable to an appropriate USB port on your device.

Note:

1.

The USB downstream port does not provide power while the monitor is switched off.

2.

Power output for USB-A

5V/0.9A.

8.

Plug the monitor power cord and the computer cord into grounded electrical outlets.

Note:

A certified power supply cord has to be used with this equipment. The relevant national

installation and/or equipment regulations shall be considered. A certified power supply cord not

lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation

H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used. Alternative a flexible cord be

of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm²) shall be used.

Advertising