Lenovo Q24h-10 23.8" 16:9 FreeSync IPS Monitor (Gray) - Manual (Page 10)

Chapter 1 . 1-4
4. Connect the DP cable to the DP connector of the monitor and the other end on the back of the
computer.
5. Connect the speaker’s audio cable and audio jack of monitor to transfer audio source from
HDMI
/
DP/USB-C.
Note: Please be aware that excessive and/or extreme volume might damage your hearing ability.
6. Connect one end of the USB cable to the USB downstream terminal of the monitor, and connect the
other end of the USB cable to an appropriate USB port on your device.
Note: The USB Battery Charging Specification 1.2 output 5Vdc/1.5A(typical), 2A (max) and the other
standard USB Output 5Vdc/900mA.The USB downstream port does not provide power while
the monitor is switched off.