Mounting on a wall – LG 24BK430H-B 23.8" 16:9 IPS FreeSync Monitor User Manual

Page 13

Advertising
background image

13

ENG

ENGLISH

Mounting on a wall

For proper ventilation, allow a clearance of 100 mm
(3.94 inches) on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.

If you intend to mount the Monitor set to a wall, attach
Wall mounting interface (optional parts) to the back of
the set.
When you install the Monitor set using a wall mounting
interface (optional parts), attach it carefully so it will not
drop.

1

If you use screw longer than standard, the monitor

might be damaged internally.

2

If you use improper screw, the product might be dam-

aged and drop from mounted position.

In this case, LG Electronics is not responsible for it.

100 mm

(3.94 inches)

y

Disconnect the power cord first, and then
move or install the Monitor set. Otherwise
electric shock may occur.

y

If you install the Monitor set on a ceiling or
slanted wall, it may fall and result in severe
injury.

y

Use only an authorized LG wall mount
and contact the local dealer or qualified
personnel.

y

Do not over tighten the screws as this may
cause damage to the Monitor set and void
your warranty.

y

Use only screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.

y

Screw length from outer surface of back
cover should be under 8mm(0.31 inches).

y

Use the screws that are listed on the VESA
standard screw specifications.

y

The wall mount kit will include an installation
manual and necessary parts.

y

The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.

y

The length of screws may differ depending
on the wall mount. Be sure to use the proper
length.

y

For more information, refer to the
instructions supplied with the wall mount.

CAUTION

NOTE

Back Cover

Wall mount Pad

Wall mount Pad

Back Cover

Standard screw

Max.8mm(0.31 inches)

y

Wall Mount (A x B)

A

B

Model

22MK4 series

24MK4 series

22BK4 series

24BK4 series

Wall Mount (A x B)

75 x 75

Standard screw

M4

Number of screws

4

Model

27MK4 series

27BK4 series

Wall Mount (A x B)

100 x 100

Standard screw

M4

Number of screws

4

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

Advertising