Image aspect ratio – Epson BrightLink 435Wi User Manual
Page 82
3.
Select the Extended menu and press Enter.
4.
Select the Projection setting and press Enter.
5.
Select a projection mode and press Enter.
6.
Press Menu or Esc to exit the menus.
Parent topic:
Projection Modes
Image Aspect Ratio
The projector can display images in different width-to-height ratios called aspect ratios. Normally the
input signal from your video source determines the image's aspect ratio. However, for certain images
you can change the aspect ratio to fit your screen by pressing a button on the remote control.
If you always want to use a particular aspect ratio for a certain video input source, you can select it using
the projector's menus.
Note: If you change the image aspect ratio while using the interactive pen, you will need to recalibrate
the pen.
Changing the Image Aspect Ratio
Available Image Aspect Ratios
Parent topic:
Using Basic Projector Features
82