MSI PRO MP161 15.6" Portable Monitor - Manual (Page 15)

Troubleshooting
The power LED indicator is not on.
 Press the power button on the monitor again.
 Check if the power cable of the monitor is properly connected.
There’s no image.
 Check if the computer and graphics card are installed correctly.
 Check if the computer and monitor are connected to the power socket and powered normally.
 Check if the signal cable of the monitor is correctly connected.
 The computer may be in standby mode. Press any key to start the monitor.
The image is not centered or the size is abnormal.
 Refer to the default display mode and set the computer as the setting fit for the setting of the
monitor.
Plug and play does not work.
 Check if the power cable of the monitor is properly connected.
 Check if the signal cable of the monitor is correctly connected.
 Check if your computer and graphics card support Plug and Play.
Icons, fonts and screens are blurry or there are color problems.
 Do not use any extended video transmission cables.
 Adjust brightness and contrast.
 Adjust RGB color or adjust color temperature.
 Check if the signal cable of the monitor is correctly connected.
 Check if the signal cable connector has any bent pins.
The monitor flashes or ripples.
 Adjust the screen update rate in the computer setting to meet the monitor specifications.
 Update the graphics card driver.
 Keep the monitor away from electronic devices that may cause electromagnetic interference
(EMI).