MSI MPG ARTYMIS 273CQR 27" 16:9 Curved FreeSync 165 Hz QHD HDR VA Gaming Monitor - Manual (Page 4)

4
Getting Started
Installing the Monitor Stand
1. Leave the monitor in its protective foam packaging. Align the latches of the stand
to the monitor. Tighten the stand with screws.
2. Connect the stand base to the stand and tighten the screw to secure the stand
base.
3. Align the latches to place the stand cover.
4. Adjust the angle of the stand, make sure the stand assembly is properly installed
before setting the monitor upright.
⚠
Important
∙ Remove the screws on the monitor groove if needed before installing the stand.
∙ Place the monitor on a soft, protected surface to avoid scratching the display panel.
∙ Do not use any sharp objects on the panel.
∙ The groove for installing the stand bracket can also be used for wall mount. Please
contact your dealer for proper wall mount kit.
2
1
3