Escient DVDN-552 - Manual (Page 26)

PAGE 26
FireBall™
DVDM-
552
User
’s Manual
VIDEO OUTPUTS
FireBall has several video output formats and connectors including:
Main Zone
• Component Video
• S-Video
• Composite Video
Remote Zone (connects to an MP-200)
• Component Video
• S-Video
• Composite Video
All video outputs are active at the same time, so you can use as many as
you like without causing signal degradation. However, the corresponding
video input from the changer must also be connected to watch a movie
from the changer on that video output.
The Component Video output will provide the best possible video quality
for the FireBall User Interface, but will require that your video system
has an available component input.
The S-Video output is typically used for the optional Escient ETP-1500
touch panel to provide the user interface directly on the touch panel.
The composite output is typically used for an a/v distribution system,
such as the Xantech AV-61 or the Niles ZR-4630/8630 distribution
systems.