Adjustable stand with pivot capability – NEC MultiSync E273F-BK 27" 16:9 Full HD IPS Monitor User Manual
Page 21
English−19
English
5. Please check that you can still raise and lower the monitor screen after you have installed the cables (Figure 5 and Figure 6).
Figure 5
Figure 6
DisplayPort Cable
DisplayPort Cable
USB Cable
USB Cable
Power Cord
Power Cord
6. Connect the power cord to a power outlet.
OOTEN •
Please refer to the Caution section of this manual for proper selection of the AC power cord (see
).
•
Please make sure that enough power is supplied to the monitor. Please refer to
“Chapter 4 Specifications” on page 29
7. Turn on the monitor by pressing the button and then turn on the computer.
OOTEN
If you have any problems please refer to the Troubleshooting section of this User’s Manual (see
).
Adjustable Stand with Pivot Capability
Hold the monitor on each side and adjust height, tilt and swivel as desired.
For screen rotation (pivot), hold the monitor on each side, lift to its maximum height and turn it from landscape to portrait.
Tilt and Swivel
CAUTIOON
Rotation, Raise and Lower
CAUTIOON: