Philips 8000 34" 1440p HDR 175 Hz Curved Ultrawide Gaming Monitor (White) - Manual (Page 25)

23
the monitor goes into standby mode
for over 2 hour or while you turn off the
monitor.
Compulsory execution message
To reduce the risk of image retention, Panel Refresh will
automatically run after in use for a long periods of time.
Panel Refresh will take few seconds and power LED will blink
until it is �nished.
Please do not unplug the power cable during the process.
Proceed
• Auto Warning
Default setting is On to provide
messages as reminders of Pixel Refresh
automatically. If you turn off Auto
Warning, the messages will not appear,
yet the calculation of cumulative usage
hours continues. If Auto Warning is set
to Off, the cumulative usage exceeds
16 hours, Pixel Refresh will be activated
automatically when you press the power
button or the monitor goes into Standby
mode.
A reminder message that pops up after 4 hours
of continuous use, and will then appear every 2
hours after.
To maintain the panel quality, Pixel Refresh will automatically
run after in use for a periods of time.
Pixel Refresh will take few minutes and Power LED will blink until
it is �nished.
Please do not unplug the power cable during the process.
Accumulative usage: 4HOURS
Do you want to activate Pixel Refresh now?
Yes No
Note
While the display is in standby mode,
refresh will run automatically when
needed. This will ensure your display
offers the best possible performance
while minimizing interruptions.
LED Indicator
Status LED Color
Power On White
Standby White (breathing)
Pixel Refresh White (blinking)
Panel Refresh Amber (blinking)
Panel Error Amber
Power Off No LED