Philips Momentum 27" 4K HDR 144 Hz Gaming Monitor - Manual (Page 16)

14
2. Setting up the monitor
4 MultiView in OSD menu
[ PBP ]: Picture by Picture
Open up a sub-window
side-by-side of another
signal source.
A
(main)
B
When the sub source is
not detected:
A
(main)
B
Note
The black strip shows on the top and
the bottom of the screen for the correct
aspect ratio when in the PBP mode. If
you expect to see full screen side by
side, adjust your devices resolution as
pop up attention resolution, you will
able to see 2 devices source screen
project to this display side by side
without black strips.
• PBP Input: There are 5 different
video inputs to choose as the sub
display source: [
1 HDMI 2.1 ], [ 2 HDMI
2.1 ], [ 3 HDMI 2.1 ], [ DisplayPort ],
[ USB C ].
SUB SOURCE POSSIBILITY (xl)
Inputs HDMI 1 HDMI 2 HDMI 3 DisplayPort USB C
MAIN
SOURCE
(xl)
HDMI 1 ● ● ● ● ●
HDMI 2 ● ● ● ● ●
HDMI 3 ● ● ● ● ●
DisplayPort ● ● ● ● ●
USB C ● ● ● ● ●
• Swap: The main picture source and
the sub picture source swapped on
the display.
Swap A and B source in [ PBP ] mode:
A
(main)
B
↔
B
(main)
A
• Off: Stop MultiView function.
Note
When you do the SWAP function, the
video and its audio source will swap at
the same time.