Oben CTM-2500 5-Section Carbon Fiber Monopod with VH-A30 Tilt Monopod Head Kit - Manual (Page 5)

5
3. Mounting a Head
Align the head’s socket
with the monopod’s
mounting screw , and
twist it clockwise until fully
secured. Be sure that the
bottom of the head is flush
with the plate.
For compatible heads,
tighten the three integrated
set screws with the
included hex key .
Important!
Do not overtighten the
head or the set screws.
Overtightening may
damage the monopod or
head.
OPERATION
4. Wrist Strap
For a more stable monopod
when shooting, secure the
wrist strap around your
wrist while also gripping
the pad, as shown. To
ensure stability, make sure
there’s enough tension on
the strap and your wrist.