Connection diagrams, Connecting a 7.1 preamp/processor – Emotiva LPA-1 User Manual
Page 13
Advertising
Page 13
Connection Diagrams
Connecting a 7.1 Preamp/Processor
Connection using a 7 channel preout to LPA-1
When connecting the LPA-1 to drive a 7.1 system, you can use channels 1-5 for the
“Main” speakers as you wish, but Emotiva recommends using channels 6 and 7 as the
“Rear Back” surround channels so that the power is distributed correctly in the room. This
will yield the best results from the front L/C/R speakers and the main surround channels.
For details on connecting the
speakers to the 5 way binding
posts, please see Page 18
Advertising