EverFocus EQ610 - Manual (Page 12)

- 11 -
5. CAMERA SETUP OPERATIONS
This camera utilizes an On Screen Display (OSD) user setup menu.
5.1 Setup Buttons
To set items on the user setup menu, use the following buttons on the back panel.
○
1 Left Button: Use this button to select or adjust the parameters of the selected item. The
parameter changes each time this button is pressed.
○
2 Up Button: This button is used to move the cursor upwards. Use this button to select the
desired item.
○ 3 Set/Menu Button: This button is used to enter the setup menu. If the item has its own sub-
menu (indicated by ), press this button again to display the sub-menu.
○ 4 Right Button: Use this button to select or adjust the parameters of the selected item. The
parameter changes each time this button is pressed.
○ 5 Down Button: This button is used to move the cursor downwards. Use this button to select
the desired item.
○ 2 Up Button
○ 4 Right Button
○ 5
Down Button
○ 1 Left Button
○ 3 Set/Menu Button