Sennheiser HD 450BT Noise-Canceling Wireless Over-Ear Headphones (White) - Manual (Page 30)

FAQ/If a problem occurs ...
30 | HD 450BT
When using the analog audio cable, the music only plays on one
side of the headphones
The jack plug of the audio cable is not properly locked in place in the
headphones' audio socket:
1. Insert the 2.5 mm jack plug of the audio cable straight into the
headphones' audio socket until you feel a resistance.
2. Turn the 2.5 mm jack plug to the right until you feel a resistance.
The jack plug is now locked in place and the audio cable is cor-
rectly connected to the headphones.
3. Insert the 3.5 mm jack plug of the audio cable into the audio
output of your smartphone.
The Bluetooth wireless connection is deactivated.
OFF
Right R
Audio cable
2.5 mm
3.5 mm