Vicoustic VicFix Base Adapter for Classic Acoustic Panels (2-Pack) - Manual (Page 3)

EN
Wall Installation
This product can also be installed on the ceiling and wall with the VicFix J Profile 2m (sold
separately). For corner installation, use the VicFix Corner (sold separately).
Ceiling Installation
!
Please note: For ceiling installation do
not use the VicFix J Profile sections
supplied with the product. Use the
VicFix J Profile 2m, sold separately. It is
recommend to leave some centimeters
beyond the last panel to avoid it to loose
contact with the VicFix J profile. In
countries where earthquakes are likely
to happen, it should be applied a blocking
element such as a L profile to avoid the
last panel to slide off the VicFix J profile.
Vicoustic will not take responsibility
for any mistakes/ limitations occurring
during installations or any damages
resulting from falling panels.
Corner Installation