RF-Links Laboratory Ultra-Low Noise Power Amplifier 2.5W Wideband (1500-2200 MHz) User Manual
RF-Links Accessories for electrical
ZH-1522/3
HIGH POWER AMPLIFIER
2.5 W from 1500 MHz-2200 MHz
This is a tested Ultra low noise (Noise figure <2.1
dB/1,9 GHz), professional 2.5 W amplifier that requires
minimum driving input of 1 mW for the maximum of
2.5 W RF power output. It is broadband in 1,500 MHz-
2,200 MHz and doesn't require any tuning or adjusting.
Power supply is 12 V/ 0.98 A. Gain 28 dB. SMA
connectors Input / Output 50 ohms impedance. Class of
operation is AB.
Dimensions: 6.0" X 3.0 " X 2.0 ".
Operating Frequencies:
1500 MHz- 2200 MHz
Operating class:
Linear AB
DC Voltage:
12 V
RF power:
2.5 W
Input power:
1 mW, max. 10 mW
Minimum required voltage:
10 V
Battery power:
12 V - 14 V
Video distortion:
N/A
Video Format:
N/A
Current Consumption:
0.98 A / 12 V
Antenna:
N/A
Antenna Connector:
SMA
Impedance: 50
ohms
Temperature Range:
-40 +75* C
Dimensions:
6" X 4 " X 2"
Weight:
300 grams
Copyright © 2001-2011 RF-LINKS