Profoto A10 AirTTL-C Studio Light for Canon - Manual (Page 41)

A
10 Air
TTL
41
www.profoto.com
Profoto Air compatibility
• The Profoto A10 AirTTL-C is specifically designed for Canon
cameras that use Canon’s E-TTL II metering system.
• The Profoto A10 AirTTL-N is specifically designed for Nikon
cameras that use Nikon’s i-TTL metering system.
• The Profoto A10 AirTTL-S is specifically designed for Sony
cameras that use Sony’s TTL metering system.
• The Profoto A10 AirTTL-F is specifically designed for Fujifilm
cameras that use Fujifilm´s TTL measurement system.
• Some camera models may not be supported or have limited
functionality. Check profoto.com for the latest information on
camera support.
• The Profoto A10 AirTTL operates with Profoto flash units and
generators, with built-in Profoto Air functionality according to the
table below.
• The Profoto A10 AirTTL can also be used to trigger the Air Remote
and Air Sync Profoto Air transceivers.
• The Profoto A10 AirTTL flash can also be triggered and controlled
by other Profoto Air transceivers.
• The Profoto A10 AirTTL-C is not compatible with Canon
Speedlites or other non-Profoto flashes.
• The Profoto A10 AirTTL-N is not compatible with Nikon
Speedlights or other non-Profoto flashes.
• The Profoto A10 AirTTL-S is not compatible with Sony flashes or
other non-Profoto flashes.
• The Profoto A10 AirTTL-F is not compatible with Fujifilm flashes or
other non-Profoto external flash products.
• The Profoto A10 AirTTL is not compatible with any 3rd party radio
triggering systems.
Air labeling on
Profoto flash Enabled features on Profoto A10 AirTTL
Manual sync Remote control TTL HSS
AirTTL X X X X
Air X X
AirS X