2 what’s in the box – Afinia H+1 3D Printer User Manual
Page 9
3.2 What’s in the box
The ABS extruder is installed on the
H+1
.
The accessory box should have the following.
•
One
USB Cable
•
One
Pliers
•
One
Scarper
•
One
Nozzle Wrench: 8mm
•
One
pair of Gloves
•
One
SD Card Reader
•
One
SD Card
•
One
Calibration Card
•
Two
PTFE Tube: Shorter one for PLA Extruder; Longer one for TPU Extruder
•
Three
Allen Keys: 2mm, 2.5mm, 3mm.
•
Three
Nozzles: 0.2mm, 0.4mm, 0.6mm.
The
H+1
box should have the following.
•
One
roll of 500g ABS Filament
•
One
Flex Glass Board
•
One
Perf Glass Board
•
One
Power Adapter
•
One
Power Cord
•
One
PLA Extruder with 0.4mm Nozzle
•
One
TPU Extruder with 0.5mm Nozzle
Notice:
All accessories may subject to change without prior notice. If anything is
missing, please contact
Afinia 3D
, which can be reached at
Contact
Afinia 3D
8