LulzBot TAZ Pro S 3D Printer - Manual (Page 21)

LulzBot TAZ Pro S | 19
5
Preparing your LulzBot TAZ Pro S to Print
Your LulzBot TAZ Pro S was tested for quality assurance before being packaged. You will need to remove the
remaining filament left in the tool head from this process before loading new filament for your next print. Follow
these steps below to remove or change the filament.
i
5.1 Press the Menu button
5.2 Press the Change Filament
button
5.3 Press the 180C (PLA) button to
heat the hot end to the appropriate
filament removal temperature.
5.1 5.2 5.3
5
Preparing to Print