Vicoustic GEN_VMT PENRAY 02 Tiles Acoustic Panels (Moss Green,12-Pack) - Manual (Page 3)

EN
1_
2_
Apply Flexi Glue Ultra on the back of the acoustic panel, near the edges and in the center. Do
not wait longer than 5 minutes after applying the glue to attach the panel to the wall.
Place the panel on the suitably chosen position on the wall. Once in the desired place, press
firmly against the wall for 15 seconds.
!
For the installation of Gen Tiles on the ceiling, we recommend using Flexi Glue Ultra.
To ensure that you maximise the strength of the glue, don’t make any adjustments to the panel
after bonding.
Do not apply Gen Tiles behind radiators or too close to a heat source.