ARRI ALEXA Mini LF Ready to Shoot V-Mount Set (LPL) User Manual
Page 75
Monitoring
75
10
STATE
Shows the main camera status:
STBY
REC
PLAY
ERASE
FULL
None
ERROR
Ready for recording
Recording
Playback
Medium erase in progress
Recording medium full
No media inserted
Camera error. See
MENU > Alerts
for more information
11
MEDIA
Shows the remaining capacity of the recording medium at current FPS and codec combination in real
time. When medium capacity is less than two minutes, capacity values starts flashing orange.
12
TC
Shows the current timecode. The TC label turns orange if the sensor frame rate does not match the
project rate.
Left Section
13
EVF / SDI
Status
Look
EXP
PEAK
AD
Shows the current EVF/SDI processing (Look, Log C or ALEXA Classic 709).
Indicates that the exposure tool is active on the respective output.
Indicates that peaking is active on the respective output.
Indicates that anamorphic desqueeze is active and which lens squeeze factor is selected.
14
Camera
Status
UHD
RAW
GEN
EXT
FAN
LOCK
GRAB
TEMP
ALERT
Shows the current recording resolution.
Shows the current recording processing (RAW or Log C).
Indicates that Genlock is activated. If orange: Genlock signal is missing or not usable.
Indicates that EXT sync mode is activated.
Shows that the camera needs to increase the fan speed to cool the camera properly.
Indicates that the camera controls are locked.
Frame Grab is active.
Indicates that the camera temperature is outside of its optimal range.
Indicates an active alert state.
Right Section
15
Camera Index
Letter
Shows the camera index letter.
LDS
USB
CAL
WiFi
WRS
Shows that the LDS interface has been disabled manually.
Shows a connected USB medium.
Lens motor calibration is in progress. If orange: lens motor calibration is required.
WiFi is active.
White Radio is active.
16
MIC
Audio Meters
Internal microphones are active.
Shows the current level of camera audio channel signals. If audio recording is currently not possible, an
orange speaker icon with a small x is shown. Black markers at signal levels -20, -18, -9 dBFS for refer-
ence test tone. Yellow marker at -5 dBFS and red marker at -2 dBFS indicate a signal close to clipping.
A red frame around the meter indicates a clipping at the A/D stage.
Other
17
Center Cross
Marks the center of the image to help in framing.
18
Frame Line
Frame line (here: ARRI 1:1.85)
19
UDM
Focus
Shows measurements from Ultra Distance Measures.
Shows the current focus distance of the lens (if lens data is available).
20
HOR
Shows the electronic horizon or numeric roll and tilt values.