BenQ SL4302K 43" 4K Pantone-Validated SmSignage Display - Manual (Page 20)

Basic operations 20
Switching input signals
Press the INPUT button and those signal selection buttons on the remote control or the
INPUT button on the control panel to select an input signal.
Adjusting audio volume level
• Press  /  on the control panel or VOL- / VOL+ on the remote control to adjust the
volume.
• Go to General > Audio to adjust the volume. Refer to Audio Settings on page 27 for
more information.
• Only by switching on the master switch will either power button work. To turn on or off the
display, press the power button on the display’s control panel or on the remote control.
• Turning off the power still consumes power. The users have to un-plug the plug to completely
cut off the power supply.
MENU INPUT
Power
Button