Power – LG 55TC3CG-H 55" 4K UHD HDR Touchscreen Commercial Monitor User Manual
Page 67
ENGLISH
31
[Power]
[General] [Power]
Power-related feature settings
[No Signal Power Off (15 Min)]
Set whether to use the 15 Min Auto Off feature.
•
You can set this option to [On] or [Off].
•
If you set this feature to [On], the product turns off after it’s remained in No Signal status for 15 minutes.
•
If you set this feature to [Off], the 15 Min Force Off feature is disabled.
•
It is recommended that you set this feature to [Off] if you intend to use the product for long periods of time as the
feature turns the power of the product off.
[No IR Power Off (4hour)]
Set whether to use 4 Hours Off feature.
•
You can set this option to [On] or [Off].
•
If you set this feature to [On] the product turns off if there is no input from the remote control for 4 hours.
•
If you set this feature to [Off], the 4 Hours Off feature is disabled.
•
It is recommended that you set this feature to [Off] if you intend to use the product for long periods of time as the
feature turns the power of the product off. (It is recommended that you set this feature to [Off] if you intend to use
the product for long periods of time as the feature turns the power of the product off.)
NOTE
•
For One:Quick models, if current input is set to One:Quick, [No IR Power Off (4hour)] menu is disabled and the
function does not work.
[DPM] / [DPM (Standby Mode)]
Set the Display Power Management (DPM) mode.
•
If this feature is not set to [Off], the monitor will enter DPM mode when there is no input signal.
•
If you set this feature to [Off], [DPM] / [DPM (Standby Mode)] is disabled.
NOTE
•
For some LED models, when [PM Mode] is set to [Power Off(Default)], the Energy Saving mode remains enabled even
when there is an input signal.
[DPM Wake Up Control] / [DPM (Standby Mode) Wake Up Control]
Turns on the set according to the digital signal processing of the connected DVI-D/HDMI port.
•
When set to [Clock], the set only checks for digital clock signals and turns on once it finds the clock signal.
•
When set to [Clock+DATA], the set turns on if the digital clock and data signals are both input.