Epson Stylus NX410 Series User Manual

Start here, Unpack, Select your language

Advertising
background image

*411615700*

*411615700*

If anything is missing, contact Epson as described on the back.

Note:

The model name of your product may vary slightly from the one shown above.

The included CD and documentation apply to all products in the series.

Caution:

Do not open ink cartridge packages until you are ready to install the ink.

Cartridges are vacuum packed to maintain reliability.

Canada only: For French speakers, remove stickers from the backing sheet and place
over corresponding text on the control panel.

Remove all protective materials.

Unpack

1

Start Here

Select your language

3

Press

or

to select to select your language, then press

OK.

Language

3

Flip the feeder guard forward, then squeeze the edge guide and slide it
left.

4

Load paper against the right edge and behind the tab, with the printable
side face up.

4 6

8½ 11

Note:

Don’t load the paper sideways; always load it short edge first.

5

Slide the edge guide over.

1

Connect the power cable.

Caution:

Do not connect to your computer yet.

2

Press the

On button.

Note:

You can raise the LCD display screen for better viewing, if necessary.

Turn on the printer

2

(Included for Canada only)

Install ink cartridges

4

Note:

Do not load paper yet.

1

Lift up the scanner, then open the cartridge cover.

2

Shake the ink cartridges gently 4 or 5 times, then unpack them.

3

Remove only the yellow tape from each cartridge.

Caution:

Do not remove any other seals or the cartridge may leak.

4

Insert the cartridges in the holder for each color.

5

Press each cartridge down until it clicks.

6

Close the cartridge cover. Press down until it clicks.

7

Lower the scanner.

8

Press the

OK button to charge the ink. Charging takes about 2 minutes.

Note:

Your printer ships with full cartridges and part of the ink from the first

cartridges is used for priming the printer.

Caution:

Don’t turn off the printer while it is charging or you’ll waste ink.

1

Open the paper support and pull up the extensions.

2

Open the output tray, pull out the extensions, and raise the stopper.

Note:

Do not raise the stopper for legal-size paper.

5

Load paper

Series

Advertising