Epson ELPDC03 - Manual (Page 18)

14 Using the Document Camera
What To Do If You See a Blank Screen
If an image doesn’t appear, try the following:
■ Make sure the cables are connected correctly, as described on
page 8.
■ Make sure everything is turned on in the correct order as
described on page 12.
■ Make sure the POWER and Auto Focus lights on the control
panel are green and the lamps are lit.
■ If an image still doesn’t appear, refer to Chapter 4 for more help.
Positioning Your Document on the Stage
Place your document with the top near the rear of the stage. If you
need to change the orientation of the document, rotate the camera
head 90° to the right or 90°/180° to the left.
Some documents can pass through the rear of the document camera.
Use the paper pass-through slot to position these documents as
needed.
paper
pass-through
slot
rotate camera head 90°
rotate camera head 90°/180°