BenQ RM8602K 86" Class 4K UHD Educational Touchscreen LED Display - Manual (Page 23)

23 Video wall installation guide
Checking the safe distance between displays
During video wall installation, you might want to place the displays as close to each other as
possible. Note the LCD screens may be damaged through the direct transfer of weight if an
appropriate distance is not kept between displays. The recommended gap between displays may
vary depending on your purchased models as listed below.
Actual bezel-to-bezel dimensions may exceed the listed minimum values (5.4mm for
PH460/PL460, 3.5mm for PL490/PL550/PL552/PH5501/PL4901/PL5501, 1.8 mm for
PL553/PH5502, 0.88mm for PL5502) due to different tiling methods.
You are provided with gap inspection pads to ensure appropriate space between the cascaded
displays during video wall installation.
Model name Recommended gap between displays
P Series ≥ 0.5 mm
1. Get one of the provided gap inspection
pads and fold it as illustrated.
2. Remove the peeling sheet from the gap
inspection pad.
3. Stick the pad to the edge where another display will be stacked as illustrated. Each edge
should have 3 gap inspection pads attached.
Adhesive tape with peeling sheet
Front panel