Electrolux 98001 KF SN - Manual (Page 9)

9
Operating the appliance
Operating the appliance
3
Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
3
After switching on, within approx. 10 seconds a heat setting or a function must
be set, otherwise the appliance automatically switches itself off.
Selecting the heat setting
3
The keep warm setting
u
lies between
¾
and
¿
. It is used to keep food warm.
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that are
switched on to the keep warm setting and then back to the heat setting that
was previously set.
3
Timer functions are not stopped by .
3
locks the whole control panel except the sensor field .
Control panel Display Pilot light
Switch on Touch for 2 seconds
¾
/
h
lights up
Switch off Touch for 1 second
h
/ none goes out
Control panel Display
Increase Touch
u
to
Ç
/
p
Decrease Touch
Ç
to
¾
Switch off Touch and at the same time
¾
Control panel Display
To switch on Touch
u
To switch off Touch heat setting that was previously
set (not automatic warm up func
tion)