Elo TouchSystems 1566L - Manual (Page 34)

B-27
A P P E N D I X
B
C HAPTER 4
T
OUCHMONITOR
S
AFETY
This manual contains information that is important for the proper setup and
maintenance of your industrial touchmonitor. Before setting up and powering
on your new touchmonitor, read through this manual, especially Chapter 2
(Installation), and Chapter 3 (Operation).
1 To reduce the risk of electric shock, follow all safety notices and never open
the touchmonitor or brick supply case.
2 Turn off the product before cleaning
3 Your new brick supply is equipped with a 3-wire, grounding power cord. The
power cord plug will only fit into a three-prong safety ground outlet. Do not
attempt to fit the plug into an outlet that has not been configured for this
purpose. Do not use a damaged power cord. Use only the power cord that
comes with your Elo TouchSystems touchmonitor. Use of an unauthorized
power cord may invalidate your warranty.
4 The slots located on the sides and top of the brick supply and touchmonitor
case are for ventilation. Do not block or insert anything inside the ventilation
slots.
5 It is important that the brick supply and the rear portion of your touchmonitor
remain dry. Do not pour liquid into or onto your brick supply or
touchmonitor. If your brick supply or touchmonitor become wet do not
attempt to repair them yourself.