Lab.gruppen CA1202 2 x 120W Commercial Amplifier - Manual (Page 6)

10 CA SERIES Quick Start Guide 11
CA Series Controls
Controls
(1) EQ knobs – Adjusts the bass and treble for
the master output(s).
(2) Master volume – Controls the overall output
level. The associated LED(s) will light green to
indicate active signal, and light red to indicate
limiting/protection.
(3) Power button – Turns the unit on, force it to
stand by. The LED will indicate power status.
(4) Mains connector – Connect the IEC cable to
a mains outlet.
(5) Config switches – Configure the output
channel for the connected load type. See
‘Getting Started’ section for details.
(6) Output – Connect your speaker(s).
(7) Remote – Allows the connection of an
external volume control module per channel.
CRC-V available as a separate accessory.
(8) Euroblock input – Accepts 3-pin Euroblock
connectors for balanced line-level sources.
For the 2-channel models, Input A is routed
to Output A only, and Input B is routed to
Output B.
(9) RCA inputs – Allows the connection of stereo
unbalanced sources, which will be summed
to mono and routed to the associated output
(Input A to Output A).
For the 2-channel models, stereo operation
can be achieved by connecting the left signal
to Input A and the right signal to Input B.
(1) (3) (2)
(4) (5) (6) (7) (8) (9)