JBL CSS-1S/T 5.25" 2-Way 10W Passive Loudspeaker (Pair) - Manual

10 Watt Multi-Tap Transformer for 100V or
70V Distributed Speaker Lines
8 Ohm Direct Setting
Included Wall-Mounting Bracket
Professional Drivers and Network
CSS-1S/T
Compact Two-Way
100V/70V/8-Ohm
Loudspeaker
System:
Frequency Range (-10 dB): 85 Hz – 18 kHz
Frequency Response (+/- 3 dB): 120 Hz – 16 kHz
Power Capacity 1 : 60 Watts
Sensitivity 2 : 86 dB SPL, 1W (2.83V) at 1m (3.3 ft)
Maximum SPL 3: 106 dB at 8 Ohm Direct setting; 96 dB at
10W setting
Nominal Coverage 2 : 120ºH x 120ºV
Directivity Factor (Q) 2 : 6.2
Directivity Index (DI): 7.9 dB
Nominal Impedance: 8 ohms (in 8Ω DIRECT mode, selectable on
back panel)
Transformer Taps: 10 W, 5 W (& 2.5W @ 70V)
Crossover Frequency: 4.3 kHz
Transducers:
LF Driver: 135 mm (5.25 in) low frequency driver
HF Driver: 19 mm (0.75 in) polycarbonate dome tweeter
Input Connectors: Spring-loaded terminals
Enclosure :
Enclosure Material: Polypropylene Structural Foam
Color: Black
Dimensions: 229 mm x 159 mm x 143 mm (9.0 in x 6.3 in
x 5.6 in)
Net Weight (each): 2.0 kg (4.5 lb)
Shipping Weight (pair): 4.8 kg (10.5 lb)
Included Accessories: Wall-mounting bracket assembly
Commercial Series
JBL continually engages in research related to product improvement. Some materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason,
any current JBL product may differ in some respect from its published description, but will always equal or exceed the original
design specifications unless otherwise stated.
Specifications:
CSS-1S/T is a versatile, compact two-way
loudspeaker designed for use on 100V or 70V
distributed speaker lines, or in 8 ohm direct
mode. The 135 mm (5¼ inch) low frequency
loudspeaker and 19 mm (¾ inch) polycarbonate
dome tweeter reproduce full-range sound
quality for foreground or background music
and are voiced for maximum speech clarity and
intelligibility.
The rugged enclosure is fitted with an
included, easy-to-install ball-type wall-mount
bracket that can pivot to aim the speaker in a
variety of directions, or the speaker can be aimed
straight out from the wall. The flat bottom
surface of the cabinet allows the speaker to be
set on a surface such as a shelf.
A multi-tap, multi-voltage transformer
provides taps of 10 and 5 Watts when driven
from a 100V distributed speaker line and
10, 5 and 2.5 Watts when driven from a 70V
distributed speaker line. Tap selection is
accomplished via a switch that is accessed
from the back panel. The speaker has a power
handling of 60 Watts continuous average pink
noise (100 hrs continuously) when set in its 8
Ohm Direct setting.
Key Features:
Applications:
1 IEC Standard, full bandwidth pink noise with 6 dB crest factor, 100 hr duration.
2 Average, 1 kHz to 10 kHz
3 Calculated based on power handling and sensitivity, exclusive of power compression at high levels.