Waves Infected Mushroom Pusher - Mixing and Mastering Plug-In (Native, SoundGrid, Download) - Manual (Page 7)

Waves Infected Mushroom Pusher User Guide
-­ 7 -­
3.2 Controls
Input
Adjusts the plugin’s input level.
Input level will not change when you load a preset.
Range: -­24 to 24 dB in 0.1 dB increments
Default: 0
Reset : 0
Sensitivity LED
Indicates when appropriate levels are reached:
o LED off (too low)
o Green (good)
o Yellow (optimal)
o Red (very hot)
Turn the Input control until the LED lights up to the desired color. For best results while
mastering, use the section of your track with the highest peaks/loudest part.
Low
Determines the amount of the Low processing added to the signal .
Range: 0 (min) to 20 (max) in 0.1 increments
Default: 0
Reset: 0
Low Note/Freq
Determines where the Low processing begins, according to Note/Freq.
Toggle/Pull down Menu:
D1=37Hz, D # 1=39Hz, E=41Hz, F=44Hz, F#=46Hz, G=49Hz, G#=52Hz,
A=55Hz, A#=58Hz, B=62Hz, C=65Hz, C#=69, D2=73Hz, D # 2=78Hz.
Default: D1=37Hz
Reset: D1=37Hz