Epson 2000/XP - Manual (Page 5)

THE IPMANAGE WINDOW
You will now use the IPManage utility to enter the encryption
code that will enable you to print using
IMAGEPRINT.
Before
launching IPManage, you will need to get your encryption. The
fastest way is via the internet and your email address. Enter the
complete address www.colorbytesoftware.com/getcode.php
into your
browser. You will be asked to enter the Login ID and dongle
number printed on the back of your
IMAGEPRINT
package.
After you receive your encryption, go to your desktop and
double-click on the IPInstall icon. When the IPInstall window
opens, Click the Manage button. The IPManage window will
appear.
The Host ID field is filled automatically by
IMAGEPRINT.
Your number
will match the number printed on your dongle. If no number appears, the
dongle has not been properly installed. Make sure the dongle is plugged
in to an active USB port.
1. In the Printer Name box, make sure that the printer choice is correct.
In this example we’ve chosen Epson 1280. You should choose your
printer type from the drop-down list.
2. Type your encryption
number in the field provided.
Click the Enable button.
3. The encryption has been
successfully installed when
the word “Disabled” changes
to “Enabled” in the window
title bar. If it does not you
may have mistyped the code
and should re-enter it and
Click Enable again.
4. Click Close.