Focusrite Scarlett Solo Studio 2x2 USB Audio Interface with Microphone and Headphones (3rd Generation) - Manual (Page 19)

19
SPECIFICATIONS
Performance Specifications
All performance figures measured in accordance with the provisions of AES17, as applicable.
Supported sample rates 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Microphone Input
Dynamic Range
111 dB (A-weighted)
Frequency Response 20 Hz to 20 kHz ±0.1 dB
THD+N
< 0.0012% (minimum gain, -1 dBFS input with 22 Hz/22 kHz
bandpass filter)
Noise EIN -128 dB (A-weighted)
Maximum Input Level +9 dBu at minimum gain
Gain Range 56 dB
Input impedance 3 kΩ
Line Input
Dynamic Range
110.5 dB (A-weighted)
Frequency Response 20 Hz to 20 kHz ±0.1 dB
THD+N
< 0.002% (minimum gain, -1 dBFS input with 22 Hz/22 kHz
bandpass filter)
Maximum Input Level +22 dBu at minimum gain
Gain Range 56 dB
Input impedance 60 kΩ
Instrument Input
Dynamic Range
110 dB (A-weighted)
Frequency Response 20 Hz to 20 kHz ±0.1 dB
THD+N
< 0.03% (minimum gain, -1 dBFS input with 22 Hz/22 kHz
bandpass filter)
Maximum Input Level +12.5 dBu at minimum gain
Gain Range 56 dB
Input impedance 1.5 MΩ
Line Outputs
Dynamic Range
108.5 dB (A-weighted)
Maximum Output Level (0 dBFS) +15.5 dBu; balanced outputs
THD+N
< 0.002% (maximum level, -1 dBFS input with 22 Hz/22 kHz
bandpass filter)
Output impedance 430 Ω
Headphone Output
Dynamic Range
104 dB (A-weighted)
Maximum Output Level 7 dBu
THD+N
< 0.002% (maximum level, -1 dBFS input with 22 Hz/22 kHz
bandpass filter)
Output impedance < 1 Ω