Blackmagic Design DaVinci Resolve Advanced Panel - Manual (Page 74)

CONFIGURATION 74
Wipe wraps when viewing reference stills:
With this option the stills wipe mode will wrap around rather
than stop at each side of the screen.
Split source clips for Pre-conform: Select to split the source clip in the Media Pool and the
master session when using the “Preconform” operation.
Master reset maintains RGB Balance:
This control defines how the panel reset buttons reset the
primary color correction. Normally, a reset will return the
primary correction values to their default values. When this
option is selected, reset will function as follows:
1) Clicking the master reset key will reset the YRGB values so
that the overall values are kept and the ratio of YRGB to each
other is maintained.
2) Clicking the RGB reset button will find the average value
of RGB, and set the RGB to that value.
Luminance mixer defaults to zero: Selecting this option sets the Y of the YRGB value for all grades
to zero. This is needed for export of an ASC-CDL and will have
an impact on all your grades if you have used the Lum Mix
control.
Show offline clips through conform gaps:
Normally, if there is a missing clip in a conformed timeline the
position of the clip is shown on the thumbnail and viewer as
black. This option permits the offline clip, with the appropriate
timecode synchronization, to be displayed in place of the black
or to ‘shine through’ the hole made by the missing clip.
Extract reel names from EDL comments:
Some file formats have reel names longer than eight characters,
and also complex file name structures. The RED r3d file is an
example. This option allows DaVinci Resolve to extract the reel
names from the EDL comments, as often used in an FCP EDL.