Installation, Usage precautions, Warning – Arturia KeyStep Pro Keyboard with Advanced Sequencer and Arpeggiator User Manual

Page 18: Register your instrument, Connecting the keystep pro to the world

Advertising
background image

2. INSTALLATION

2.1. Usage Precautions

The KeyStep Pro uses an external power adapter. Do not use any power supply or adapter

other than the unit provided by Arturia. Arturia accepts no responsibility for damage caused

by the use of an unauthorized power supply.

2.2. Warning

Do not place this product in a place or position where anyone might walk on, trip over,

or roll anything over power cords or connecting cables. The use of an extension cord is

not recommended. However, if you must use one, make sure that the cord can handle

the maximum current needed by this product. Please consult a local electrician for more

information on your power requirements. This product should be used only with accessories

supplied or recommended by Arturia. When used with any such products, please observe

all safety markings and instructions that accompany them.

2.3. Register your Instrument

Registering your instrument establishes your legal ownership of it, which entitles you to

access the Arturia Technical Support service and to be informed of updates. Additionally,

you can subscribe to the Arturia newsletter to be informed of Arturia-related news as well

as promotional offers. Connect to your

Arturia account

, go to the section My Registered

Products, then add the KeyStep Pro by entering its serial number, as printed on the sticker

located under the controller.

2.4. Connecting the KeyStep Pro to the World

Always power off all audio gear before making any connections. Failing to do so may

damage your speakers, the KeyStep Pro, or the other audio equipment. After completing all

connections, set all volume levels to zero. Power on the various devices, with your audio

amplifier or monitoring system last, then raise the volumes to a comfortable listening level.

Here is an overview of the KeyStep Pro connectors:

Purpose

Connector type

MIDI input (1x)

5-pin DIN connector

MIDI outputs (2x)

5-pin DIN connectors

USB

Standard USB type B

Power

12V DC input: internal Ø 2.1 mm, external Ø 5.5 mm

12

Arturia - User Manual Keystep Pro - Installation

Advertising