EverFocus Esd200 - Manual (Page 3)

2
INSTALLATION
n The horizontal view angle of the Smoke Detector Camera is 78-degree. Decide the location
to install the camera.
o Inspect the package contents to make sure that no damage occurred during shipping.
Z Plug in the attached video and power cable to the camera connector.
[ Connect the video output of the camera to a color monitor or other video device through a 75
ohm type coaxial cable with BNC female connector at cable extension.
\ Connect the 12VDC regulated power source of the camera to the 12VDC Power-in jack with
2 mm, center+, outer-plug.
] Adjust the direction of the lens as per needed.
Full-Screen Width of View
= 1.6 X Distance between
Camera and Target