GIGABYTE Z690 AORUS ELITE AX DDR5 LGA 1700 ATX Motherboard - Manual (Page 14)

- 14 -
&
Memory Boot Mode
Provides memory detection and training methods.
Auto Lets the BIOS automatically configure this setting.
Normal The BIOS automatically performs memory training. Please note that if the
system becomes unstable or unbootable, try to clear the CMOS values and
reset the board to default values. (Refer to the introductions of the battery/clear
CMOS jumper in Chapter 2 of the user's manual for how to clear the CMOS
values.)
Enable Fast Boot Skip memory detection and training in some specific criteria for faster memory
boot.
Disable Fast Boot Detect and train memory at every single boot.
&
Realtime Memory Timing
Allows you to fine-tune memory timings after the BIOS stage.
&
Memory Enhancement Settings
Provides several memory performance enhancement settings: Auto, Relax OC, Enhanced Stability, Normal,
Enhanced Performance, High Frequency, High Density, and DDR-4500+.
&
Memory Channel Detection Message
Allows you to determine whether to show an alert message when the memory is not installed in the optimal
memory channel.
ƒ
SPD Info
Displays information on the installed memory.
ƒ
Memory Channels Timings
d Channels Standard Timing Control, Channels Advanced Timing Control, Channels Misc
Timing Control
These sections provide memory timing settings. Note: Your system may become unstable or fail to boot
after you make changes on the memory timings. If this occurs, please reset the board to default values by
loading optimized defaults or clearing the CMOS values.
ƒ
Advanced Memory Settings