System settings, Default pod arrangement, Examples of pod order rearrangement – CHAUVET DJ GigBAR 2 All-In-One Lighting System User Manual
Page 27
GigBAR 2 User Manual Rev. 7
Page 27 of 156
System
Settings
To restore factory default settings, or make changes to individual pod settings, follow the
directions below.
1. Press
<MENU>
repeatedly until
SyS
blinks on the display.
2. Press
<ENTER>
.
3. Use
<UP>
or
<DOWN>
to select
rSEt
(factory default) or
dSET
(changes pod
arrangement).
4. Press
<ENTER>
to select the desired system setting.
If
rSEt
is selected, GigBAR 2 is restored to factory default settings.
Default Pod
Arrangement
If
dSEt
is selected, change the order of the pods by using the
steps and examples below to arrange the order of the pods:
•
Use
<UP>
to move right on the display.
•
Use
<DOWN>
to change the digit value (
1
,
2
,
3
, or
4
).
•
Press
<ENTER>
to confirm.
•
Repeat until all 4 pods are arranged as desired.
Examples of
Pod Order
Rearrangement
Ex. 1
Pod 1
Pod 1
Pod 2
Pod 2
Pod 3
Pod 3
Pod 4
Pod 4
Pod 1
Pod 4
Pod 2
Pod 3
1, 2, 3, or 4
•
1*34
•
123*
•
*234
•
12*4
Move Right
Pick a Digit
Ex. 2