Specifications, Manufacturer declarations – Sennheiser IE 900 In-Ear Headphones User Manual

Page 12

Advertising
background image

8

English

| IE 900

Specifications

Transducer principle dynamic, Extra Wide Band (XWB)
Transducer size

7 mm

Frequency response

5 to 48,000 Hz

Frequency

characteristic

diffuse-field equalized

Ear coupling

in-ear, closed

Impedance

18 Ω

Sound pressure level 123 dB at 1 kHz, 1 Vrms
THD

< 0.05% (1 kHz, 94 dB)

Attenuation

–26 dB

Cable

oxygen-free copper cable (OFC), para-aramid

reinforced, ear hooks: TPU-coated

Connectors
(see pin assignment

on inside cover page)

gold-plated;
on the earphones: MMCX connector
on the device: stereo jack plugs
3.5 mm, unbalanced, 3-pin
2.5 mm, balanced, 4-pin
4.4 mm, balanced, 5-pin

Weight

approx. 4 g per ear canal phone (without cable)

Operating

temperature

–10°C to +55°C

Maximum value of the

static magnetic field

at the surface

1.3 mT

Manufacturer declarations

For information on regulatory compliance markings, see the inside back cover.

Warranty

Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on

this product. For the current warranty conditions, please visit our website at

www.sennheiser.com or contact your Sennheiser partner.

The Australia and New Zealand Warranty Conditions can be found on the inside

back cover.

In compliance with the following requirements

• General Product Safety Directive (2001/95/EC)
Compliant to

Sound Pressure Limits

according to country specific requirements.

EU/UK declaration of conformity

• EU: RoHS Directive (2011/65/EU)

• UK: RoHS Regulations (2012)

The full text of the EU declaration of conformity is available at the following

internet address: www.sennheiser.com/download.

Notes on disposal

• EU: WEEE Directive (2012/19/EU)

• UK: WEEE Regulations (2013)

The symbol of the crossed-out wheeled bin on the product, the

battery/rechargeable battery (if applicable) and/or the packaging indicates that

these products must not be disposed of with normal household waste, but must

be disposed of separately at the end of their operational lifetime. For packaging

disposal, please observe the legal regulations on waste segregation applicable

in your country.
Further information on the recycling of theses products can be obtained from

your municipal administration, from the municipal collection points, or from

your Sennheiser partner.
The separate collection of waste electrical and electronic equipment, batteries/

rechargeable batteries (if applicable) and packagings is used to promote the

reuse and recycling and to prevent negative effects caused by e.g. potentially

hazardous substances contained in these products. Herewith you make an

important contribution to the protection of the environment and public health.

Advertising