Logitech G Flight Yoke System - Manual (Page 7)

7 English
Now, connect the Throttle Quadrant to the Flight Yoke with
the PS/2 connector provided.
Use the integrated USB Hub on the side of the Flight Yoke to easily
connect other parts of the Logitech G Flight range of products,
such as additional Flight Throttle Quadrants, Flight Rudder Pedals,
or other peripherals.
INSTALLATION FOR WINDOWS
®
10, WINDOWS
®
8.1
AND WINDOWS ® 7
DRIVER INSTALLATION
1 Visit logitech.com/support/yoke to download the latest drivers and software
for your operating system.
2 With device disconnected , follow the onscreen instructions to complete the
installation.
3 At the Driver Setup screen, only when prompted , insert USB cable into one of
your computer’s USB ports, then click Next .
4 At the Driver Setup screen, click Next to test your controller.
5 Follow the on screen prompts to test the controls and verify device operation.
After the test, click OK.