WeatherPod PhotoPod (Black, 4-Pack) - Manual

Visit UTWPods.com for “Folding” and “Set Up” Pod videos.
Congrats! You’ve mastered opening your WeatherPod®. Now you’re ready to enjoy it!
Folding Your Pod is as Easy as 1-2 -3.
Using Your Pod for the First Time. A Little Practice Helps.
TIPS FOR USING YOUR WEATHERPOD ®
UNTWIST UNFOLD SHAKE
1. FOLD PANELS FLAT 2. CURL THEN ROLL UNDER 3. PUSH SIDES IN TO FLATTEN
It may take one ot two tries to get the hang of it. Our Folding Videos can help as well! Watch now.
2A. CURL TOP
FORWARD
2B. FOLD UNDER
1. Place the Pod on its back so it’s laying on the ground with the front facing up.
Fold one side flat, then the other. Both panels should lay completely flat.
Make sure the wires are also flat (not twisted). Step on wires to flatten.
2. Tuck in roof and floor panels. Stand the Pod up so the back of the Pod is facing you.
Curling your Pod correctly is key to folding. Firmly curl the Pod forward halfway down.
Continue curling the Pod (roll it under) until the top wire is facing toward your shins.
3. Once the Pod is fully curled under, grab the right side of the Pod and push it toward the middle.
Grab the left side and push it on top to shape the Pod into a flat circle. Place it in its carry case.
•
Remove the Pod tent from its carry bag. Hold the tent with both hands extended at arms length.
•
Release one hand and let the tent untwist until it pops open.
•
Unzip one or more panels then unfold side panels. Pull out panels to pop tent fully open.
•
Sit the tent in a vertical position (standing it up).
•
Grab the tent by both front sides. Shake vigorously for 3 seconds.