Emerson EWC19DA - Manual (Page 22)

- 22 - EN
1B17
USING THE TITLE MENU
With a DVD containing a title menu, you can select
desired titles from the menu.
1 Press the TITLE button.
• The title menu will appear.
2 Select the desired title.
• Press the Arrow buttons (L/K/B/s) to change the
setting, and then press the ENTER button.
CALLING UP A MENU SCREEN DUR-
ING PLAYBACK
For DVDs
• Press the MENU button to call up the DVD menu.
• Press the TITLE button to call up the title menu.
NOTE:
• Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
DVD
PAUSING PLAYBACK OR
DISPLAYING A STILL PICTURE
DVD CD
1 Press the PAUSE button during playback.
• Playback will pause, with sound
muted.
2 Press the PLAY button to resume playback.
PAUSE
PLAY
RESUMING PLAYBACK FROM
THE POINT WHERE
PLAYBACK STOPPED
DVD
1 Press the STOP button during playback.
• Playback will stop, and "STOP"
will appear at the top-right of the
screen and then "MEMO ON" at
the top-left.
2 Press the PLAY button. Playback will start
from the point where the previous playback
session was stopped.
NOTES:
• The resume function can be reset by pressing the
STOP button twice or by opening the disc loading
tray.
• The resume function is not available with audio
CDs.
MEMO ON
PLAY
STEPPING THROUGH FRAMES
DVD
1
Press the PAUSE button while playback is
paused.
• The next picture frame is dis-
played with sound muted each
time the button is pressed.
2
Press the PLAY button to resume playback.
PAUSE
PLAY
TD205.QX33 01.3.3 1:39 PM Page 22