Eagle Electronics FishElite 642c - Manual (Page 146)

138
5. Use
↑ ↓ to change the data in another digital data box or press
EXIT
to return to normal operation.
Customize Navigation Page
While on the Navigation Page, press
MENU |
↓ to
C USTOMIZE
| ENT . The
digital data box at the top of the screen will begin to flash.
1. Press ENT if you want to change the data in that box or use
↓ ↑
to
select a different data box to customize.
2. With the desired data box highlighted and flashing, press ENT to ac-
cess the Data Viewer menu.
3. Use
↑ ↓ to select a data category, which will have either a "+" or "-" in
front of it. If the desired category is flanked by a "+", a list of data op-
tions will appear when you highlight the category and press
ENT .
4. After opening the category, use
↑ ↓ to select the desired data option
and press ENT to turn it on (check) or turn it off (uncheck) and press
EXIT .
5. Use
↑ ↓ to change the data in another digital data box or press
EXIT
to return to normal operation.
Customize Map Page
While on the Map Page, press
PAGES , select T
WO
P
OSITION
F
ORMAT
and
press EXIT . Press MENU , select C
USTOMIZE
and press ENT . The digital data
box at the top of the screen will begin to flash.
1. Press ENT if you want to change the data in that box or use
↓ ↑
to
select a different data box to customize.
2. With the desired data box highlighted and flashing, press ENT to ac-
cess the Data Viewer menu.
3. Use
↑ ↓ to select a data category, which will have either a "+" or "-" in
front of it. If the desired category is flanked by a "+", a list of data op-
tions will appear when you highlight the category and press
ENT .
4. After opening the category, use
↑ ↓ to select the desired data option
and press ENT to turn it on (check) or turn it off (uncheck) and press
EXIT .
5. Use
↑ ↓ to change the data in another digital data box or press
EXIT
to return to normal operation.
GPS Simulator
The GPS simulator simulates real world navigation. It is a great way to
practice using your unit. You can set the starting location by entering
latitude/longitude or from a stored waypoint, map place or POI location.
You can steer the position arrow and change speed on the map by using