NZXT Function Tenkeyless Mechanical Keyboard (Matte Black) - Manual (Page 15)

1 4
F U N C T I O N
A. DOWNLOADING AND INSTALLING CAM SOFTWARE
Go to nzxt.com/software/cam for the latest version of CAM
B. SETUP OF CAM PROFILES AND STORING ON THE KEYBOARD
The Function Keyboard has four onboard profiles that can be setup and stored
via CAM software. After profile information is stored, it is not necessary to run
CAM to operate stored lighting, macros, etc.
C. CONTROLLING PROFILE SWITCHING
Depressing the FN (short for “Function”) key + one of the F1, F2, F3, or F4
keys will change to the profile stored at that number value (1 through 4,
respectively).
D. LIGHTING MODES
There are four default lighting modes stored on profiles #1 through #4 and
can be accessed by depressing the FN key + F1, F2, F3, or F4.
7. USING THE NZXT FUNCTION KEYBOARD
WITH CAM SOFTWARE
E. CUSTOMIZING RGB LIGHTING
By using CAM/Keyboard/Lighting, users are able to customize lighting per key,
and set up lighting under profiles (if desired), as described in
SECTION B.
F. CUSTOMIZING KEYBOARD MACROS
By using CAM/Keyboard/Macros, users are able to create both simple and
complex macros, and store them under profiles (if desired), as described in
SECTION B.
G. REBINDING KEYS
By using CAM/Keyboard/Key Remapping, users are able to create new and
customized key bindings, and store them under profiles (if desired), as described
in
SECTION B.