Canon imageCLASS MF656Cdw Multifunction Wireless Color Laser Printer - Manual (Page 4)

En
Es
Fr
Pt
4
6 7 8 9 10 12 11 1
Using Color Correction
For better print results, the use of color correction is
recommended.
1.
Choose whether to use color correction.
2.
Check that the paper displayed on screen is
actually loaded and then select <OK>.
3.
Select <Start> and correct the colors by
following the on-screen instructions.
Specifying the Network
Settings
Specify the settings for connecting the machine to a
network. Before proceeding, check that the computer and
router are correctly connected to the network.
Wireless LAN
1.
Check the router's "SSID" and "Network
key."
SSID : XXXXXXXXXXXX
Network key : XXXXXXXXXXXX
2.
To configure the settings, select <Yes> on
the operation panel.
3.
Check the message and select <OK>.
4.
Select the network with a matching SSID.
5.
Enter the password (network key) and
select <Apply>.
7
8
Wired LAN
Connect the router to the machine with a LAN cable
and then select <No> in the screen for choosing how to
connect to the network.
Setting Up the Toner
Replenishment Service
Use this procedure to set up the toner replenishment
service. To use this service, you must enter into an
agreement beforehand.
1.
Check the message and select <Next>.
2.
Check the conditions of use, and then
choose whether or not to use the service.
• To use the service: <Accept>.
• To not use the service or not enter into an
agreement: Select <Do Not Accept> and proceed
to step
10
.
3.
When <Connection was successful> appears,
select <OK>.
Ending the Setup Guide
Check the description in the Application Library and then
select <End>.
9
10