Eiki LC-X71 LC-X71L - Manual (Page 7)

- 7 -
1 Remove 5 screws A , 2 screws B , and loosen 2 screws
C, and then take the Cabinet Top upward off.
Note: If you want to remove the Cabinet Front-Top only,
you do not need to remove screws
A . Remove 2 screws
B .
Mechanical Disassemblies
Mechanical disassemble should be made following procedures in numerical order.
Following steps show the basic procedures, therefore unnecessary step may be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original otherwise it may cause loss of
performance and product safety.
Fig.1
1 Remove the Cabinet Front-Top, Lens Cover Holder and
Lens Cover upward off.
2 Remove 2 screws D to take the Cabinet Front off.
3 Remove Terminal Boards, SW Board, RC Front Board,
and speakers on the Cabinet Front.
Fig.2- -1
Cabinet Top removal 1
Cabinet Front removal 2
C
B
A
A
A
A
B
A
D
D
Cabinet Front-Top
Lens Cover Holder
Cabinet Front
Lens Cover
C
Fig.2 -2
SW
Board
Speaker
RC
Front
Board
Terminal
Board