Epson Multimedia Photo Viewer P-6000 - Manual (Page 14)

Getting Started 14
Note:
If you see the Home screen instead (as shown in “Using the
Home Screen” on page 15), the language has already been
selected. To change it or check the date and time, select
Settings on the Home screen. Then follow the instructions in
“Date and Time” or “Language” on page 73.
1 Press OK to select English . You see a message about
setting the date.
2 Press OK . You see the Date and Time screen:
3 Press right or left on the 4-way ring to highlight a setting
to change.
4 Press up or down on the 4-way ring to change the
setting (such as the year).
5 After setting the date, set the date format.
6 When you finish, highlight Complete and press OK .
You see the Home screen. See page 15 for details.
Note:
If you remove the battery, the date and time settings will be
erased after about one day. The next time you turn on the
viewer, the date and time setting screen will be displayed.
Locking the Buttons
You can lock the buttons on the viewer. This allows you to
place the viewer in a purse or backpack and use it with
headphones without accidentally pressing the buttons.
To lock the buttons, slide the power switch to Hold .
To unlock the buttons, slide the power switch back to the
middle position.