GVM Pro SD200B Bi-Color LED Mon(200W) - Manual (Page 15)

13
Press MODE button ,enter the main page of mode selection
(Figure 9) → rotate [knob 1] to select the mode → press
[knob 1] to enter the corresponding mode interface → set
the parameter of the item by pressing or rotating [knob 1] →
press [BACK] to go up one level.
CCT mode (Figure 10):
Adjust the brightness by turning knob 1, and adjust the color
temperature by turning knob 2.
Source mode (Figure 11):
Rotate and press SELECTOR briefly to select Source mode,
you can choose the desired light source effect.
Effect mode (Figure 12):
Rotate and short press SELECTOR key to select FX mode, you
can choose a variety of light effects: Lightning, CCT Loop,
Candle, Bad Bulb, TV, Paparazzi, Explosion, Pulsing, Strobe,
Fire, Fireworks, Welding.
② Mode key（MODE） ：
FAN SETTINGS (Figure 6):
Set the cooling fan mode.
LANGUAGE (Figure 7):
Set the system language.
SYSTEM SETTINGS (Figure8):
View system information and
restore Factory Settings.
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 12
Figure 11