Electrolux EHS 60020 K - Manual (Page 9)

operating the appliance electrolux 9
Operating the appliance
Switching the appliance on and off
Selecting the cooking zone
The decimal point is displayed by
the selected cooking zone. Then a
heat setting must be set for this
cooking zone within 6 seconds, oth-
erwise it must be re-selected.
Selecting the heat setting
After selecting the cooking zone,
briefly release the sensor field .
After 6 seconds with no input the
selection is cancelled and the deci-
mal point goes out. To set the re-
quired cooking zone again, make
another selection.
Control panel Display
Switch on Touch for 2 seconds. / Decimal point flashes
Switch off Touch for 1 second / none
Control panel Display
Select Touch Decimal point illuminates
Control panel Display
Increase Touch to
Decrease Touch to
Switch off Touch and at the same time