Ergotron FX75 - Manual

T
he FX Series products FX30, FX75, and FXT75
allow a flat panel monitor or large display to be mounted to
a vertical surface like a picture hung on a wall. Once installed,
these modules provide a rock-solid platform, even for monitors
with touch-screen capability. To remove a monitor from the
wall, the user simply moves the quick-release lever to the side
and lifts off the monitor. Reinstallation is just as easy!
The FXT75 provides for up to 25 degrees (+20°/-5°) of tilt
capability for large displays weighing between 30 and 75 lbs.
The unique patent pending tilt mechanism design provides for
smooth (finger-touch) continuous tilt adjustment whether wall
or pole mounted.
Highlights
• Places monitor less than 1" from
wall (FX30 & FX75); 3-1/2" for the
FXT75
• Allows monitor or large display to
be attached to or removed from
wall quickly and easily
• Solid and stable platform for
touch-screen monitor compatibility
• Maximum weight capacities
up to 75 lbs (34.1 kg) for select
configurations*
• Steel construction for long-lasting
durability
• FX Series products can be
attached to most any sturdy
vertical surface such as machines,
walls, cabinets, etc. The FX75
and FXT75 also may be pole
mounted or used with the Ergotron
Command Post
• VESA® Flat Display Mounting
Interface (FDMI™) Standard
compliant for easy monitor
attachment
• LIFETIME warranty; five-year
warranty on FXT75 pivot
* See Weight Capacity section on
opposite side for more information.
Product Sheet
low-profile mounting solution
Ergotron® FX Series
870-05-034, rev. 27/07/06
www.ergotron.com
© 2006 Ergotron, Inc., All rights reserved.
FXT75 FX75 FX30